Smart Battery Checker

260,000 color display visible under strong sunlight.
Exquisite and powerful BG-8S smart battery checker
Fully support BattGO technology.
ISDT BG-8S

Make battery smarter

Cooperating with BattGO technology, only with XT60i connected and you can get full knowledge on detail parameters on your battery.
Easy to read cells voltage, battery cycles, working parameters and fast set to your preferred settings.
Read more on BattGO.
ISDT SC-BG-8S

Auto balancing cells voltage

Advanced auto balancing algorithm, make sure every cell is well balanced. After completion auto into low power mode.
ISDT SC-BG-8S

Powerful portable charging function.

Connecting to your battery, BG-8S can become your power bank for mobile devices.
Support Qualcomm QC 2.0/3.0, compatible with BC1.2 and Apple devices. Maximum output 12V/2A.
ISDT SC-BG-8S

Receiver signal test and protocol analysis

With standard 3 pin plug, BG-8S can detect BEC output voltage.
BG-8S also supports multiple protocol analysis including PWM, PPM&S.BUS and etc. With future firmware upgrades more Protocol analysis will be supported.
ISDT SC-BG-8S

Multiple measurement connections

Support XT60/XT60i, XH2.54 1-8S balance lead, XH 2.54 3pin, JST ETC to measure voltage.
Support LiHv, LiPo, Lilon, LiFe, NiMh/Cd battery and BEC output measurements.
ISDT SC-BG-8S

Support USB upgrade, multi language options

BG-8S has Micro USB port, More language options are coming soon .
ISDT SC-BG-8S

XT60i Meant for BattGO

BG-8S uses XT60i connector which was jointly developed by ISDT and Amass, support BattGO technology, and highly compatible with original XT60 plugs.
ISDT SC-BG-8S

Specifications

Function button
ISDT SC-BG-8S

②Menu button Short press to enter setting menu. Long Press to enter smart battery menu ① ③ Up/Down Button Go up down, choose different setting options.

Guide For the Connection of Balanced Port
ISDT SC-BG-8S

This product is suitable for the lithium battery which has the XH 2.54 balance port, connect the balance port align from BAT- as showed in the figure. When connecting 1S battery, input Voltage from XT60i must be more than 5V.

Specifications
Working voltage : 5.0V-36V
Input voltage 1s : 0.8V-15V
Input voltage 2-8S : 0.8V-4.8V
Battery cells : 1-8S
Voltage measurement accuracy : ±0.005V @ 4.2V
Balancing cells accuracy : < 0.005V
Support USB charging : QC 2.0 / 3.0, BC1.2, Maximum output 12V/2A
Support smart battery : Charging and discharging setting,
read battery info and usage history.
Supported Batt. Type : LiHv (1-8S) / LiPo (1-8S) / LiFe(1-8S)
Lilon (1-8S) / NiMH/Cd(1-10S)
Display : 2.4〃320×240 260,000 color IPS LCD
Dimension : 80 X 55 X 19 mm
Weight : 59g
Operating Temperature : 0-40℃
Working Humidity : 10%-90%RH (noncondensing)
Storage Temperature : -20-60℃
Storage Humidity : 5%-90%RH (noncondensing)